The effect of titanium and phosphorus on ferric/ferrous ratio in silicate melts: an experimental study     

Alexander Borisov  Harald Behrens  Francois Holtz 《Contributions to Mineralogy and Petrology》2013,166(6):1577-1591

The effect of TiO₂ and P₂O₅ on the ferric/ferrous ratio in silicate melts was investigated in model silicate melts at air conditions in the temperature range 1,400–1,550 °C at 1-atm total pressure. The base composition of the anorthite–diopside eutectic composition was modified with 10 wt % Fe₂O₃ and variable amounts of TiO₂ (up to 30 wt %) or P₂O₅ (up to 20 wt %). Some compositions also contained higher SiO₂ concentrations to compare the role of SiO₂, TiO₂, and P₂O₅ on the Fe³⁺/Fe²⁺ ratio. The ferric/ferrous ratio in experimental glasses was analyzed using a wet chemical technique with colorimetric detection of ferrous iron. It is shown that at constant temperature, an increase in SiO₂, TiO₂, and P₂O₅ content results in a decrease in the ferric/ferrous ratio. The effects of TiO₂ and SiO₂ on the Fe³⁺/Fe²⁺ ratio was found to be almost identical. In contrast, adding P₂O₅ was found to decrease ferric/ferrous ratio much more effectively than adding silica. The results were compared with the predictions from the published empirical equations forecasting Fe³⁺/Fe²⁺ ratio. It was demonstrated that the effects of TiO₂ are minor but that the effects of P₂O₅ should be included in models to better describe ferric/ferrous ratio in phosphorus-bearing silicate melts. Based on our observations, the determination of the prevailing fO₂ in magmas from the Fe³⁺/Fe²⁺ ratio in natural glasses using empirical equations published so far is discussed critically.  相似文献   

Regional sulfate–hematite–sulfide zoning in the auriferous Mariana anticline, Quadrilátero Ferrífero of Minas Gerais, Brazil     

Alexandre Raphael Cabral  Nikola Koglin  Harald Strauss  Helene Brätz  Rogerio Kwitko-Ribeiro 《Mineralium Deposita》2013,48(7):805-816

The distribution of mineral deposits, characterised as barite deposits, hematite-rich auriferous deposits and auriferous tourmaline–sulfide deposits, displays a regional sulfate–hematite–sulfide zoning along the thrust-delineated limbs of the Mariana anticline, in the south-eastern part of the Quadrilátero Ferrífero of Minas Gerais, Brazil. Cross-cut relationships of barite veins and sulfide lodes indicate that sulfidation occurred in a late-tectonic context, which is here attributed to the collapse of the ～0.6-Ga Brasiliano thrust front. Reconnaissance S-isotopic data from barite and pyrite (Antônio Pereira barite deposit and its adjacent gold deposit, respectively), and arsenopyrite (Passagem de Mariana gold deposit), suggest a new interpretation for the hydrothermal fluid overprint in the Mariana anticline. The Antônio Pereira barite has Δ³³S values that are near zero, constraining the sulfate source to rocks younger than 2.45 Ga. The barite-δ³⁴S values are between +19.6 and +20.8?‰. The Passagem arsenopyrite and tourmaline have Co/Ni ratios that define a positive linear trend with the Antônio Pereira pyrite. The latter has homogenous δ³⁴S values, between +8.8 and +8.9?‰, which are compatible with thermochemical reduction of aqueous sulfate with the S-isotopic composition of the Antônio Pereira barite.  相似文献   

A review of new interpretations of the tectonostratigraphy,geochemistry and evolution of the Onverwacht Suite,Barberton Greenstone Belt,South Africa     

H. Furnes  M. de Wit  B. Robins 《Gondwana Research》2013,23(2):403-428

The Paleoarchean (ca. 3.5–3.3 Ga) Onverwacht Suite (OS) of the Barberton Greenstone Belt consists of a 15‐km thick imbricate tectonic stack of seven complexes consisting predominantly of volcanic rocks and intrusions. Tectonostratigraphically from base to top they are the Sandspruit, Theespruit, Komati, Hooggenoeg, Noisy, Kromberg and Mendon Complexes. The Hooggenoeg and Noisy Complexes in the middle of the OS are separated by a significant unconformity resulting from the uplift of the submarine lavas and deep erosion, demonstrating the onset of tectonic accretion prior to 3455 Ma. The basic lavas of the tectonostratigraphic lower (Theespruit, Sandspruit and Komati) and upper (Mendon) complexes are composed of komatiite, komatiitic basalt and high-MgO basalt, whereas those in the middle part (Hooggenoeg and Kromberg) are predominantly high- to low-MgO tholeiitic basalts. Felsic volcanic rocks and intrusions are important in two of the complexes (Theespruit and Noisy). The ultramafic to basaltic lavas show REE patterns that are almost flat and resemble those of modern MORB, whereas those of the felsic rocks are flat from Lu to Gd and moderately to strongly enriched in LREE, similar to modern arcs. Average ε_{Nd (T)} values are close to depleted mantle growth curves. In MORB-normalised multi-element diagrams, the komatiitic to basaltic rocks exhibit flat patterns from Lu through La and consistent relative enrichment in the elements Pb, U, Th, Ba and Cs. Apart from the Komati Complex, the majority of the lavas show significant negative Nb and Ta anomalies. Enrichment in non-conservative incompatible elements (Cs, Ba, Th, LREE) relative to conservative elements (Ta, Nb, Zr, Hf, Ti, Y, HREE) shows that the komatiitic to basaltic magmas were generated from metasomatised mantle above subducting altered oceanic crust. The geochemistry of the felsic rocks indicates an origin by melting of subducted amphibolite and eclogite. The tectonostratigraphy and the geochemical characteristics of the lavas and intrusions are consistent with successive obduction and accretion of segments of oceanic crust formed in back-arc basins and volcanic arcs.  相似文献   

Earth's oldest preserved unconformity — Prospect of a beginning in the tectono-sedimentary continental cycle?     

Maarten de Wit  Harald Furnes 《Gondwana Research》2013,23(2):429-435

Earth's oldest preserved conglomerates and basaltic pillow lavas at Isua, Greenland, provide robust field evidence for deep- and shallow-water environments on our planet within the first billion years of its formation. The conglomerates represent the first Paleoarchaean archive of sub-aerial erosion and shallow water sedimentation. These ca. 3700 million year old sedimentary rocks, now metamorphosed at amphibolite grade, comprise units of rounded quartz pebbles set in a sandy to muddy matrix that unconformably overlie an ophiolite sequence. The pillow lavas of the ophiolite are variolitic and essentially vesicle-free, indicative of formation in a deep water environment. Locally, an unconformity separates the conglomerates from the deformed ophiolite-related rocks; elsewhere the contact between these units is tectonic. Such field relationship between deep and shallow water environments resemble those preserved in younger orogenic belts, where obducted oceanic crust has been tectonically emplaced across terrestrial platforms or subaerial parts of forearc and backarc basins.  相似文献   

Joint clay–heavy–light mineral analysis: a tool to investigate the hydrographic–hydraulic regime of Late Cenozoic deltaic inland fans under changing climatic conditions (Cuvelai-Etosha Basin, Namibia)     

Harald G. Dill  S. Kaufhold  F. Lindenmaier  R. Dohrmann  R. Ludwig  R. Botz 《International Journal of Earth Sciences》2013,102(1):265-304

An interdisciplinary study (major and minor elements, C and O isotopes, heavy and light minerals, phyllosilicates, wireline logs) in northern Namibia unraveled the hydrographic and hydraulic evolution of alluvial–fluvial sediments of the Kunene and Cubango megafans (Etosha-Cuvelai Basin). Three principal aquatic regimes were operative within the megafan complex: (1) the hydrographic regime, (2) the proximal hydraulic regime, (3) the distal hydraulic regime. The allogenic mineral assemblages mirror the hydrographic variation or drainage system and the lithological evolution of the fan sediments (alluvial–fluvial fan, lacustrine environment with evaporites, fan delta progradation). Authigenic heavy minerals are markers of the physical–chemical condition (Eh and pH values) of the hydraulic regime within the proximal fan at the basin margin. Authigenic heavy, light and clay minerals equally contribute to the determination of the fluid chemistry and temperature, as well as the source of chemical constituents of the former pore fluids percolating through the distal fan. Carbonatization was the most pronounced event in the distal hydraulic system and controlled by the presence of biogenic as well as atmospheric carbon. The isotope-based determination of the temperatures, albeit strongly fluctuating, do not exceed 40 °C. The overall pH values determined for the hydraulic regime within the distal fan range from slightly acidic to alkaline. The presence of zeolites attests to some short-lasting but strong deviations from the pH range, mainly towards more alkaline conditions. Heavy, light and clay mineral analyses proved to be a useful tool to determine the (paleo)hydrology of alluvial–fluvial fan systems in tropical arid to semiarid climates.  相似文献   

Salt kinematics and regional tectonics across a Permian gas field: a case study from East Frisia, NW Germany     

Anna Alexandra Vackiner  Philipp Antrett  Frank Strozyk  Stefan Back  Peter Kukla  Harald Stollhofen 《International Journal of Earth Sciences》2013,102(6):1701-1716

This study presents a reconstruction of the tectonic history of an Upper Rotliegend tight gas field in Northern Germany. Tectonism of the greater study area was influenced by multiple phases of salt movement, which produced a variety of salt-related structural features such as salt walls, salt diapirs as well as salt glaciers (namakiers). A sequential 2D retro-deformation and stratal backstripping methodology was used to differentiate mechanisms inducing salt movement and to discuss their relation to regional tectonics. The quantitative geometric restoration included sedimentary balancing, decompaction, fault-related deformation, salt movement, thermal subsidence, and isostasy to unravel the post-depositional tectonic overprint of the Rotliegend reservoir rock. The results of this study indicate that reactive salt diapirism started during an Early Triassic interval of thin-skinned extensional tectonics, followed by an active diapirism stage with an overburden salt piercement in the Late Triassic, and finally a period of intensive salt surface extrusion and the formation of salt glaciers (namakiers) in Late Triassic and Jurassic times. Since the Early Cretaceous, salt in the study area has been rising by passive diapirism.  相似文献   

Impact of Poroelastic Response of Sandstones on Geothermal Power Production     

Guido Blöcher  Günter Zimmermann  Harald Milsch 《Pure and Applied Geophysics》2009,166(5-7):1107-1123

During geothermal power production using a borehole doublet consisting of a production and injection well, the reservoir conditions such as permeability k, porosity φ and Skempton coefficient B at the geothermal research site Gross Schoenebeck/Germany will change. Besides a temperature decrease at the injection well and a change of the chemical equilibrium, also the pore pressure p _p will vary in a range of approximately 44 MPa ± 10 MPa in our reservoir at ?3850 to ?4258 m depth. This leads to a poroelastic response of the reservoir rocks depending on effective pressure p _eff (difference between mean stress and pore pressure), resulting in a change in permeability k, porosity φ and the poroelastic parameter Skempton coefficient B. Hence, we investigated the effective pressure dependency of Flechtinger sandstone, an outcropping equivalent of the reservoir rock via laboratory experiments. The permeability decreased by 21% at an effective pressure range from 3 to 30 MPa, the porosity decreased by 11% (p _eff = 6 to 65 MPa) and the Skempton coefficient decreased by 24% (p _eff = 4 to 25 MPa). We will show which mechanisms lead to the change of the mentioned hydraulic and poroelastic parameters and the influence of these changes on the productivity of the reservoir. The most significant changes occur at low effective pressures until 15 to 20 MPa. For our in situ reservoir conditions p _eff = 43 MPa a change of 10 MPa effective pressure will result in a change in matrix permeability of less than 4% and in matrix porosity of less than 2%. Besides natural fracture systems, fault zones and induced hydraulic fractures, the rock matrix its only one part of geothermal systems. All components can be influenced by pressure, temperature and chemical reactions. Therefore, the determined small poroelastic response of rock matrix does not significantly influence the sustainability of the geothermal reservoir.  相似文献   

Labor Market Marginalization of Youth in San Antonio,Texas     

Harald Bauder  Bob Sharpe 《The Professional geographer》2000,52(3):531-543

Poverty among inner‐city residents is associated with their marginal status in the labor market. Marginalization in the labor market begins during youth when important educational and employment decisions are made. Analysis of 1990 U.S. Census tract data for San Antonio, Texas identifies the lack of a high school diploma, poverty, non‐employment, and non‐enrollment in school as conditions of marginality for youth. Spatial patterns of youth labor market marginalization show concentrations in the inner city and in sectors on the West, South, and Eastside. Regression analysis reveals that levels of youth marginalization are associated with neighborhood context represented by the employment, behavioral, and ethnic characteristics of the overall residential population of a census tract.  相似文献   

Little auks (Alle alle) breeding in a High Arctic fjord system: bimodal foraging strategies as a response to poor food quality?     

Harald Steen  Daniel Vogedes  Fredrik Broms  Stig Falk-Petersen  & Jørgen Berge 《Polar research》2007,26(2):118-125

  相似文献   

The dependence of the partitioning of iron and europium between plagioclase and hydrous tonalitic melt on oxygen fugacity   总被引：1，自引：0，他引：1  

Max Wilke  Harald Behrens 《Contributions to Mineralogy and Petrology》1999,137(1-2):102-114

The dependence of iron and europium partitioning between plagioclase and melt on oxygen fugacity was studied in the system SiO₂(Qz)—NaAlSi₃O₈(Ab)—CaAl₂Si₂O₈(An)—H₂O. Experiments were performed at 500 MPa and 850 °C/750 °C under water saturated conditions. The oxygen fugacity was varied in the log f _O2-range from −7.27 to −15.78. To work at the most reducing conditions the classical double-capsule technique was modified. The sample and a C—O—H bearing sensor capsule were placed next to each other within a BN jacket to minimise loss of hydrogen to the vessel atmosphere. By this setup redox conditions slightly more reducing than the FeO—Fe₃O₄ buffer could be maintained even in 96 h runs. Raman spectra showed that the BN was modified by reaction with hydrogen resulting in a low hydrogen permeability. The partition coefficients determined for Eu at 850 °C and 500 MPa vary from 0.095 at conditions of the Cu—Cu₂O buffer to 1.81 at the most reducing conditions (C—O—H sensor). In the same f _O2 interval the partition coefficient for Fe varies from 0.55 at oxidising conditions to 0.08 at the most reducing conditions. The partitioning of Sm, which was added as a reference for a trivalent REE, does not vary with the oxygen fugacity, yielding an average value for D = 0.07. Lowering the temperature to 750 °C for a given f _O2 decreases the partition coefficient of Eu and increases that of Fe. Comparison with published data at 1 atm and at higher temperatures shows that both temperature and composition of the melt have strong effects on the partitioning behaviour. As the change of the partition coefficients in the geologically relevant f _O2 range is quite strong, element partitioning of Eu and Fe might be used to estimate redox conditions for the genesis of igneous rocks. Furthermore, by modelling the partitioning data it is possible to extract information about the redox state of the melt. Resulting ferric-ferrous ratios show significant differences from those predicted by empirical models. Received: 14 October 1998 / Received: 5 March 1999  相似文献